All for Joomla All for Webmasters

Aluminium Security Shutters

Our product range has been developed in Britain to provide an architecturally acceptable answer to the growing demand for vandalism and burglary protection on domestic, commercial and retail properties.

The slimline finish makes internal fitting of window shutters a frequent choice. Our continuous programme of product development has produced a compact shutter of exceptional strength for small to medium size apertures.

Installations nationally protect windows and doors on city centre, suburban and rural homes, offices, factories, sports centres, medical premises, schools, community centres, computer rooms and golf clubs. In short, any building where security is a concern.

Shutter Box

The shutter coil is completely encased in a two piece, roll formed aluminium box, available in a range of six sizes according to the shutter height and slat type. The box is styled with a 45º chamfer to minimise the visual impact. On large electric operation shutters which require a manual override the box extends beyond the width of the guides to accommodate the override mechanisms on the drive side. Lugs at each end of the box locate into the box section of the guide rail.

Shutter Slats

A range of profiles is available dependent upon the security and/or vision requirement.

Aluminium Shutters

are available in extruded aluminium in single and twin wall profiles and roll formed in twin wall foam insulation filled profiles.

Steel Shutters

The SeceuroShield/Vision 7500 is a single wall profile in 22swg steel. The SeceuroShield 4000 and 5500 are roll formed twin wall foam insulation filled profiles. The bottom slat further allows for tailoring of security level.

Operation

By Rod crank, Swivel/geared belt, Spring loaded or Electric (Shown) Safe operation of shutters which are not visible from the point of operation must be considered.

Guide Rails

Constructed from extruded aluminium with a brush pile or neoprene liner for quiet, smooth operation. The guide rail is strengthened by a box section which also provides a separate fixing position and allows the shutter box to locate into. Size varies with slat type, shutter size and level of security. For locations with high security risk areas or high wind loading a windlock guide is available for some slat types.

Shutter Box

The shutter coil is completely encased in a two piece, roll formed aluminium box, available in a range of six sizes according to the shutter height and slat type. The box is styled with a 45º chamfer to minimise the visual impact. On large electric operation shutters which require a manual override the box extends beyond the width of the guides to accommodate the override mechanisms on the drive side. Lugs at each end of the box locate into the box section of the guide rail.

Shutter Slats

A range of profiles is available dependent upon the security and/or vision requirement.

Aluminium Shutters

are available in extruded aluminium in single and twin wall profiles and roll formed in twin wall foam insulation filled profiles.

Steel Shutters

The SeceuroShield/Vision 7500 is a single wall profile in 22swg steel. The SeceuroShield 4000 and 5500 are roll formed twin wall foam insulation filled profiles. The bottom slat further allows for tailoring of security level.

Operation

By Rod crank, Swivel/geared belt, Spring loaded or Electric (Shown) Safe operation of shutters which are not visible from the point of operation must be considered.

Guide Rails

Constructed from extruded aluminium with a brush pile or neoprene liner for quiet, smooth operation. The guide rail is strengthened by a box section which also provides a separate fixing position and allows the shutter box to locate into. Size varies with slat type, shutter size and level of security. For locations with high security risk areas or high wind loading a windlock guide is available for some slat types.