Don’t compromise on safety; merely conceal it until needed, and with additional safety features like battery back-up, emergency

power and controlled fail safe descent ViiFire Door will quietly and inconspicuously protect you 24 hours a day, 7 days a week

leaving you with full peace of mind. The ViiFire Door can be retro-fitted and or designed and installed into new build projects creating

the opportunity to rethink the design of your building internally.

Click to download ViiFire.Door.pdf

Click to download ViiFire.DoorTech.pdf

The ViiFire Door is a compact fully automatic motorised roller system with

a high temperature stainless steel reinforced curtain, tested up to 1000°c,

concealed in a strong steel casing above the doorway or opening. It remains

hidden but ready to work – in the event of a fire. It is easy for a competent

person to install and the first and only ‘plug and play’ system.

The ViiFire Door can be either a main alarm controlled or a standalone Fire

Curtain safety system, replacing traditional fire doors in corridors, lobbies or

‘compartments’. The system only deploys in the event of a fire, total power

or system failure (as required by regulation) or manual activation. The system

specification must be approved by an authorised person ie Building Control.

Touch-switch, push-switch, pressure mat or motion sensor

Emergency retract works for 20 cycles during 2 hours

*Emergency Retract buttons are not supplied as standard. Please ensure you

check with the appropriate authority if emergency retract is required.

Message 1 – Curtain descending

Message 2 – Curtain obstruction

Red Light – Flashing (not strobe) to indicate that the unit is operating.

that senses the obstruction, causing the curtain to retract, pause, play the

obstruction message, then descend again. This sequence is repeated three

times in a row before finally descending regardless of obstruction.

seconds the voice warning device activates. This is a warning device only. The

curtain will descend in the event of activation.

thermal fuse alarm inputs. Detectors can be wired in series to extend cover.

Headbox: Back 190mm (h/b)

Front 137 mm (h/f)

Depth 150mm (d)

Side Guides: Width 55mm (w)

Depth 85mm (d)

Opening 30mm (o)

The design caters for a standard range of opening sizes from

900mm x 2000mm to 2500mm x 2300mm. Special sizes can be

accommodated up to a maximum size of 3000mm x 3000mm.

The descent speed is factory set to between 0.06 m/s to 0.15 m/s

to comply with BS PAS 121:2007 (5.3a).

The system is designed as ‘plug and play’. This means that all ancillary

equipment is provided with a labeled plug that plugs into a corresponding

labeled socket.

The system contains it’s own dedicated, self-monitoring battery back-up &

emergency power system.

This system comes with an aesthetically stylish mini control panel as standard.

Only the battery and control fuses are on the main control box.